This panelized house is located n Westport, Connecticut. The house was designed by Sellers Lathrop Architects LLC. The panels were manufactured by Bensonwood and the house was built by The Pratley Construction, LLC.
Photo courtesy of Michael Biondo Photography for Prefabulous Small House published by Taunton Press
This panelized house is located n Westport CT. The house was designed by Sellers Lathrop ArchitectsLLC. The panels were manufactured by Bensonwood and the house was built by The Pratley Construction, LLC.
Photo courtesy of Michael Biondo Photography for Prefabulous Small House published by Taunton Press
Panelized construction is on the increase in this country and around the world. It has become very popular for a variety of reasons. There is a lack of skilled labor, people willing to work outdoors in sometimes difficult weather conditions. Building panels in a factory is far more ideal, in a protected work environment. Wood that is sitting out on site can get wet and later twist and buckle after the house is built. On-site construction is dependent on local weather conditions. This is not the case for panelized as well as other prefab types of construction – construction can continue under all weather conditions – very hot, very cold, snow and sleet.
This panelized house with post and beam construction, in Serenbe in Chattahoochee Hills, Georgia. More about the Serenbe community can be seen in my recent article on the community.
Photo courtesy of Chris Nelms for Prefabulous World, published by Abrams
In prefab factories, there is access to more sophisticated tools and machinery, speeding up the production time, with little dependence on the weather, no waiting for professionals to appear at the job site and less waste and pilferage of materials. Ultimately there is also a cost savings in time, labor and materials.
Panelization is also an environmentally friendly way to build. Instead of filling up Dumpsters with debris on site, cutoffs of wood and other materials can be recycled and used for other projects in the factory. Drywall and wiring that is not being used can be returned to the manufacturer and recycled. Often factories offer the wood they cannot use to the community to use for their fireplaces and wood stoves.
Located in East Hampton, New York, this Yankee Barn Home is panelized with a timber frame.
Photos are courtesy of Yankee Barn Homes for Prefabulous World, published by Abrams
An early study performed in 1996 demonstrated the advantages of panelization. The study was called Framing the American Dream. Two identical houses were built side by side; one was site built and the other was panelized. In the study they found several remarkable statistics, including a 75% reduction in man-hours to frame, 25 percent reduction in the amount of lumber, 75 percent reduction in scrap generated.
The green (r)evolution Plus Energy House is a panelized house in Cologne, Germany built by Huf Haus. In spite of all the glazing, this house is extremely energy efficient.
Photos courtesy of Huf Haus for Prefabulous World, published by Abrams
Panelized construction has been very popular in the United States and around the world because it is an easier method of prefabrication than some other methods. Transporting materials is simpler and less expansive, for example, than modular construction, which may require several flat bed trucks to deliver the modules. On the downside, modular houses are inspected in the factory, eliminating that requirement. With panelized houses, they are inspected on site, the same way as stick construction would be. With panelized construction, as with other prefabricated types of construction, it is easier to stay on budget because more of the design must be completed before construction will begin.
The Camden Passihaus is located in London, England. This panelized house with a timber frame is certified Passihaus, and designed by bere:architects.
Photo courtesy of Tim Crocker for Prefabulous World, published by Abrams
Prefabrication is being used for a large percentage of houses today in the United States and around the world. Sometimes it is not for the complete house but for a part of it, such as with the use of prefabricated trusses.
My continuous mantra is prefabrication is the future of homebuilding because of the many advantages to panelization and the various other prefab methods. A common arguments is: Would you ever consider having the parts of your car delivered to your driveway so that you or a local contractor could put it together? Most people would agree that they prefer the experience and expertise that comes with a factory built car.
